Performance
|
Management
|
HTTP/HTTPS, SSH or Telnet; Optional secure enterprise management via Digi Remote Manager
|
Protocols
|
IPv4/IPv6, UDP/TCP, DHCP, Extended Telnet RFC 2217, Telnet, Reverse Telnet, SSH direct to serial port, Modbus/TCP to Modbus protocol conversion support
|
Software
|
Patented RealPort COM port redirector (server initiated or device initiated); RFC 2217; Python support
|
Status LEDs
|
Serial: Tx/Rx; Ethernet: Link/Activity, Diagnostic
|
Dimensions (L x W x H)
|
4.15 in x 7.7 in x 1.3 in (10.5 cm x 19.6 cm x 3.3 cm)
|
17 in x 6.95 in x 1.62 in (43.18 cm x 17.65 cm x 4.1 cm) (19" rack mountable, includes kit)
|
Weight
|
4.1 lb (1.86 kg)
|
5 lb (2.3 kg)
|
Security
|
HTTPS, SSL, SSL/TLS, SSHv2, FIPS 197, SNMPv2, PPP
|
Interfaces
|
Serial
|
Ports
|
8 RS 232 serial ports
MEI version: 8 RS 232/422/485 serial ports (software selectable)
|
16 RS 232 serial ports
MEI version: 16 RS 232/422/485 serial ports (software selectable)
|
Throughput
|
Up to 230 Kbps per port
|
Signal Support
|
TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI
|
Ethernet
|
Physical Layer
|
10/100 Base-T
|
Data Rate
|
10/100 Mbps
|
Mode
|
Full or Half duplex
|
USB
|
Ports
|
2 ports @ .5A max per port
|
Performance
|
Power Input
|
9-30 VDC @ .8A max
|
100-240 VAC, 50-60 Hz, 0.4A
|
Power Supply
|
12VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included; Extended temperature power supply available
|
Open frame power supply: 100 to 250 VAC in 12 VDC out
|
Power Consumption
|
Typical: 6 W (500mA @ 12Vdc)
Max: 12 W (1A @ 12 Vdc)
|
Typical: 8 W (660mA @ 12 Vdc)
Max: 15 W (1.25A @ 12 Vdc)
|
Surge Protection
|
4 kV burst (EFT) per-4-4; 2 kV surge per EN61000-4
|
1 kV burst (EFT) per EN61000-4-4; 2 kV surge transient per
|
Environmental
|
Operating Temperature
|
0° C to 60° C (32° F to 140° F)
|
0° C to 55° C (32° F to 131° F)
|
Storage Temperature
|
-35° C to 85° C (-31° F to 185° F)
|
Relative Humidity
|
5 to 95% (non-condensing)
|
Ethernet Isolation
|
1500VAC min per IEEE 802.3/ABSU X 3.263
|
Serial Port Protection (ESD)
|
+8 kV air gap and +4 kV contact discharge per IEC 1000-4-2
|
Approvals
|
Safety
|
UL60950-1, EN/IEC 60950-1, CAN/CSA C22.2 No. 60950, CUL60950-1-03
|
Emissions/Immunity
|
FCC Part 15 Subpart B Class A, EN55024, EN55022, Class B, AS/NZS CUSOR 22, EN61000-3-2 ,3
|